Kaspersky Endpoint Security 10 (10.3.0.10010) SP2 Maintenance Release 2

Kaspersky Endpoint Security

0 208

Kaspersky Endpoint Security 10 Service Pack 2 Maintenance Release 2 for Windows (hereinafter also referred to as the application or as Kaspersky Endpoint Security) gives corporate users all-in-one protection against known digital threats.

WHAT’S NEW IN KASPERSKY ENDPOINT SECURITY 10 SERVICE PACK 2 MAINTENANCE RELEASE 2 FOR WINDOWS

The Maintenance Release 2 update for Kaspersky Endpoint Security 10 Service Pack 2 contains changes required for fixing incompatibility issues between Kaspersky Endpoint Security and the Microsoft Windows 10 Redstone 4 operating system.

Attention! When removing an already installed application update in the Microsoft Windows 10 Redstone 4 operating system, the application and/or the operating system may hang.

MINIMUM CONFIGURATION

For the application to work properly, the computer must meet the following requirements:

General requirements:
Processor with a clock speed of 1 GHz or more (that supports the SSE2 instruction set)
RAM:
1 GB (for 32-bit operating systems)
2 GB (for 64-bit operating systems)
Hard drive: 2 GB of free disk space

Operating systems:
Microsoft Windows 10 Pro / Enterprise x86 / х64.
For details about support for Microsoft Windows 10, please refer to the article at http://support.kaspersky.com/13036.
Microsoft Windows 8.1 Pro / Enterprise x86 / х64.
Microsoft Windows 8 Pro / Enterprise x86 / х64.
Microsoft Windows 7 Professional / Enterprise / Ultimate x86 / х64 SP1 or later.
Microsoft Windows Server 2016 х64.
For details about support for Microsoft Windows Server 2016, please refer to the article at http://support.kaspersky.com/13036.
Microsoft Windows Server 2012 R2 Standard x64.
Microsoft Windows Server 2012 Foundation / Standard х64.
Microsoft Small Business Server 2011 Standard x64.
Microsoft Windows Server 2008 R2 Standard / Enterprise х64 SP1.
Microsoft Windows Server 2008 Standard / Enterprise х64 SP2.

Server platform support limitations:
The ReFS file system is supported with limitations.
The Server Core and Cluster Mode configurations are not supported.
Disk encryption (Kaspersky FDE) and encryption of files on server platforms are not supported.

Supported virtual platforms:
VMWare ESXi 6.0.0 3620759.
Microsoft Hyper-V 3.0.
Citrix XenServer 7.0.
Citrix XenDesktop 7.13.
Citrix Provisioning Services 7.13.

Features and Limitations:
Full disk encryption (FDE) on Hyper-V virtual machines is not supported.
Full disk encryption (FDE) and file level encryption (FLE) on Citrix virtual platforms is not supported.

For other details regarding support for virtual platforms, please refer to http://support.kaspersky.com/14332.

APPLICATION COMPATIBILITY WITH KASPERSKY SECURITY CENTER

The application is compatible with Kaspersky Security Center 10 Service Pack 2 Maintenance Release 1 and Kaspersky Security Center 10 Service Pack 3.

To manage the application remotely via Kaspersky Security Center:
1. Install Network Agent on the computer.
For detailed information, refer to the Kaspersky Security Center Administrator’s Guide.
2. Install the Administration Plug-in of Kaspersky Endpoint Security for Windows in the Kaspersky Security Center console.
The installation file of the Administration Plug-in is included in the application distribution package.
You can also download the appropriate version of the plug-in at http://support.kaspersky.com/9333.

APPLICATION COMPATIBILITY WITH AES ENCRYPTION MODULES AND DETAILS ON UPGRADING ENCRYPTION TO THE SERVICE PACK 2 MAINTENANCE RELEASE 2 VERSION

The encryption module is included in the application installation package starting with Kaspersky Endpoint Security 10 Service Pack 2 version. In light of this, Kaspersky Endpoint Security 10 Service Pack 2 Maintenance Release 2 for Windows is incompatible with AES encryption modules released for previous versions of Kaspersky Endpoint Security.

When the application is installed from the distribution package, all libraries required for encryption are installed automatically if the full disk encryption (FDE) or file level encryption (FLE) component is selected.

Important note! For automatic upgrade of an installed encryption module, use the appropriate distribution package for Kaspersky Endpoint Security 10 Service Pack 2 Maintenance Release 2:
kes10winsp2_mr2__aes256 – to upgrade an AES encryption module with a 256-bit effective key length;
kes10winsp2_mr2__aes56 – to upgrade an AES encryption module with a 56-bit effective key length.

If you want to switch from the utilized encryption to encryption with a different key length, you must delete the utilized AES encryption module before upgrading the application to the Service Pack 2 Maintenance Release 2 version.

Before removing or upgrading the encryption module, you must decrypt all hard drives that have been encrypted using full disk encryption (FDE). No access to folder level encryption (FLE) files will be provided after you remove Encryption Module.

When upgrading from the following configurations, the application installer automatically removes the installed encryption module and installs all libraries necessary for encryption:
Kaspersky Endpoint Security 10 Service Pack 1 (build 10.2.2.10535) and encryption module version 1.0.2.1068;
Kaspersky Endpoint Security 10 Service Pack 1 Maintenance Release 1 (build 10.2.2.10535(MR1)) and encryption module version 1.0.2.1068;
Kaspersky Endpoint Security 10 Service Pack 1 Maintenance Release 2 (build 10.2.4.674) and encryption module version 1.1.0.73;
Kaspersky Endpoint Security 10 Service Pack 1 Maintenance Release 3 (build 10.2.5.3201) and encryption module version 1.1.0.73;
Kaspersky Endpoint Security 10 Service Pack 1 Maintenance Release 4 (build 10.2.6.3733) and encryption module version 1.1.0.73.

If you are upgrading the application from the Service Pack 1 (build 10.2.2.10535) or Service Pack 1 Maintenance Release 1 (build 10.2.2.10535(MR1)) version and an encryption module of version 1.0.0.724 or 1.0.1.814 is installed on the computer, you have to upgrade the encryption module to version 1.0.2.1068 before upgrading the application.

If you are upgrading the application from the Service Pack 1 Maintenance Release 2 (build 10.2.4.674) or Service Pack 1 Maintenance Release 4 (build 10.2.6.3733) version and an encryption module of version 1.0.0.724, 1.0.1.814 or 1.0.2.1068 is installed on the computer, you have to upgrade the encryption module to version 1.1.0.73 before upgrading the application.

INSTALLING FROM THE DISTRIBUTION PACKAGE

To install the application locally, run the setup.exe file from the full distribution package and follow the Setup Wizard instructions. See the Administrator’s Guide for more details on how to install the application.

During installation, Kaspersky Endpoint Security detects and allows you to uninstall applications that may affect the performance of the user’s computer or cause other problems (even to the point of complete inoperability) when running at the same time as the product.
The full list of incompatible software is available at http://support.kaspersky.com/9371.

You can upgrade the following applications to Kaspersky Endpoint Security 10 Service Pack 2 Maintenance Release 2 for Windows during installation from the full distribution package:
Kaspersky Endpoint Security 10 Service Pack 1 for Windows (build 10.2.2.10535);
Kaspersky Endpoint Security 10 Service Pack 1 Maintenance Release 1 for Windows (build 10.2.2.10535(MR1));
Kaspersky Endpoint Security 10 Service Pack 1 Maintenance Release 2 for Windows (build 10.2.4.674);
Kaspersky Endpoint Security 10 Service Pack 1 Maintenance Release 3 for Windows (build 10.2.5.3201);
Kaspersky Endpoint Security 10 Service Pack 1 Maintenance Release 4 (build 10.2.6.3733);
Kaspersky Endpoint Security 10 Service Pack 2 for Windows (build 10.3.0.6294);
Kaspersky Endpoint Security 10 Service Pack 2 Maintenance Release 1 for Windows (build 10.3.0.6294).

Upgrading from beta versions to Kaspersky Endpoint Security 10 Service Pack 2 Maintenance Release 2 for Windows is not supported.

The encryption module is included in the application installation package starting with Kaspersky Endpoint Security 10 Service Pack 2 version. All libraries required for encryption will be automatically installed to your computer in the following cases:
1. During installation of the full disk encryption (FDE) component.
2. During installation of the file level encryption (FLE) component.
3. During installation of an update on a computer that has the following versions of the application installed (provided that any of the encryption components (FDE or FLE) is installed):
Kaspersky Endpoint Security 10 Service Pack 2 for Windows (build 10.3.0.6294);
Kaspersky Endpoint Security 10 Service Pack 2 Maintenance Release 1 for Windows (build 10.3.0.6294).
4. During installation of an upgrade on a computer with the encryption module installed. Automatic upgrade will be performed only for the following configurations:
Kaspersky Endpoint Security 10 Service Pack 1 (build 10.2.2.10535) and encryption module version 1.0.2.1068;
Kaspersky Endpoint Security 10 Service Pack 1 Maintenance Release 1 (build 10.2.2.10535(MR1)) and encryption module version 1.0.2.1068;
Kaspersky Endpoint Security 10 Service Pack 1 Maintenance Release 2 (build 10.2.4.674) and encryption module version 1.1.0.73;
Kaspersky Endpoint Security 10 Service Pack 1 Maintenance Release 3 (build 10.2.5.3201) and encryption module version 1.1.0.73;
Kaspersky Endpoint Security 10 Service Pack 1 Maintenance Release 4 (build 10.2.6.3733) and encryption module version 1.1.0.73.

For an automatic encryption update, use the appropriate distribution package for Kaspersky Endpoint Security 10 Service Pack 2 Maintenance Release 2:
kes10winsp2_mr2__aes256 – to upgrade an AES encryption module with a 256-bit effective key length.
kes10winsp2_mr2__aes56 – to upgrade an AES encryption module with a 56-bit effective key length.

If the conditions described above are met, the application installer automatically removes the installed encryption module and installs all libraries required for encryption, if necessary.

For a description of the methods used for updating configurations different from those listed above, as well as the actions that must be performed if you want to switch from the utilized encryption to encryption with a different effective key length, please refer to the section titled APPLICATION COMPATIBILITY WITH AES ENCRYPTION MODULES AND DETAILS ON UPGRADING ENCRYPTION TO THE SERVICE PACK 2 MAINTENANCE RELEASE 2 VERSION.

UPGRADING VIA THE KASPERSKY LAB UPDATE SERVICE

Kaspersky Endpoint Security 10 Service Pack 2 Maintenance Release 2 for Windows can be installed via the Kaspersky Lab update service.

You can upgrade the following applications using the Kaspersky Lab update service:
• Kaspersky Endpoint Security 10 Service Pack 2 for Windows (build 10.3.0.6294);
• Kaspersky Endpoint Security 10 Service Pack 2 Maintenance Release 1 for Windows (build 10.3.0.6294).

Upgrading from beta versions to Kaspersky Endpoint Security 10 Service Pack 2 Maintenance Release 2 for Windows is not supported.

Please note the following special considerations when upgrading an application via the Kaspersky Lab update service:
• The update can be installed over all private patches for the Service Pack 2 and Service Pack 2 Maintenance Release 1 version.
Before installation of an update, you must read the text of the End User License Agreement and confirm your acceptance of its terms. If you do not confirm your acceptance, the update will not be installed.
If the computer is managed by Kaspersky Security Center, you can confirm your acceptance using the Kaspersky Security Center console, in the Application Management node, in the Software Updates section.
If the application has been installed in stand-alone mode (without management using Kaspersky Security Center), you can confirm your acceptance in the local interface of the application.
• To complete the update installation, you must restart your computer.

Attention! Removal of the update for the Microsoft Windows 10 Redstone 4 operating system will cause the application to no longer work, and may cause the system to hang.

COMPATIBILITY WITH PRIVATE PATCHES

The Kaspersky Endpoint Security 10 Service Pack 2 Maintenance Release 2 for Windows update is compatible with all private fixes for Kaspersky Endpoint Security 10 Service Pack 2, but does not include them.

Download

Leave A Reply

Your email address will not be published.

This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies AcceptMore Info